Electrician Training Electrical Certification wiring recessed light fixtures Electrical Wiring Electrical Troubleshooting and Electrical Repairs wire outdoor light fixture Home Electrical Wiring Diagrams
wiring home generator and transfer switch wiring a 220 volt range cord outlet Wiring for GFCI Outlets Wiring Outlets and a Switched Outlet Wiring and Installing Ceiling Fans and Remote Controls wire dimmer switch wiring diagrams for switches wiring a dryer cord and 220 outlet circuit breaker panel
Electrical Wire and Cable


Four Wire Oven to a Three Wire Circuit

How to Make the Electrical Wiring Connections for a 3-Wire or 4-Wire 240 Volt Electric Oven


Wiring Diagrams for 3 and 4 Wire Ovens
[ad#block]Electrical Question: My new oven has four wires one black one white one red and one ground but my house has only a black a white and ground.
How should I connect the oven? black to black and white to white and ground to ground but what do I do with the red wire from the oven?

This electrical question came from: Randy, a Homeowner from Hurst, Texas.

Dave’s Reply:
Thanks for your electrical question Randy.

Wiring Connections for a 3-Wire or 4-Wire oven

How to Make the Electrical Wiring Connections for a 3-Wire or 4-Wire 240 Volt Electric Oven

 

Oven Electrical Wiring Connections
oven

Lets look at how the electric oven is wired and the possible solutions if your circuit does not seem to the same.

For more information about 220 Volt Wiring Diagram
220 Volt Wiring Diagram
220 Volt Wiring Diagram
Wiring 220 Volt Electrical Outlet
Home electrical wiring includes 110 volt outlets and 220 volt outlets and receptacles which are common place in every home. See how electrical outlets for the home are wired.


» You Can Avoid Costly Mistakes! «

Here's How to Do It:
Wire It Right with the help of my Illustrated Wiring Book

Great for any Home Wiring Project.


  electrical wiring  

Complete Guide to Home Electrical Wiring

Perfect for Homeowners, Students,
Handyman, Handywomen, and Electricians
Includes:
Wiring GFCI Outlets
Wiring Home Electric Circuits
120 Volt and 240 Volt Outlet Circuits
Wiring Light Switches
Wiring 3-Wire and 4-Wire Electric Range
Wiring 3-Wire and 4-Wire Dryer Cord and Dryer Outlet
How to Troubleshoot and Repair Electrical Wiring
Wiring Methods for Upgrading Electrical Wiring
NEC Codes for Home Electrical Wiring
....and much more.





Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.

Electrical Tips to Help You Wire it Right

The Safest Way to Test Electrical Devices and Identify Electric Wires!

The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.

The Quickest Way to Check for Faulty Electrical Wiring!

The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.

Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!

The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..

The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.



More articles about Oven Wiring and Home Electrical Wiring:
« Previous Next »
Hot Tub Grounding and Neutral Requirements Before You Buy a Generator You Should Read This

FAQs Frequently Asked Questions and Comments

4 Responses to “Four Wire Oven to a Three Wire Circuit”
  1. Dave Rongey says:

    Hi Doug,
    Please see the page as described in the article: Wiring a Kitchen Oven
    On that page you will see photos, wiring diagrams, and a full explanation that will assist you with wiring your oven.

    As for the circuit wiring coming out of the wall:
    Typically older homes with an existing 240 volt oven circuit had the white wire which was used for the red wire, and the installing electrician did not color or identify the white wire as such. However the circuit wiring should be verified using a voltage tester.
    I hope this helps,
    Dave

  2. Doug says:

    I am installing a new electric wall oven. The oven has: RED, BLACK, WHITE, and BARE wires. Coming out of the wall I have: BLACK, WHITE, and BARE wires. Should it be wired : WHITE-WHITE , BLACK-BLACK , BARE-BARE? Where does the RED wire connect? Or, should I purchase a new oven cord, or run new 4 wire cable from the breaker box? Thanks for your help in advance!
    Doug G., Sweeny Texas.

  3. Dave Rongey says:

    Tim, I would check the wiring on the GFCI Outlet to make sure that the wring is correct, making sure that the Line and Load wiring designations are correct. If it is found that they are then it is possible that the GFCI outlet may be defective. I’m sorry to say that there are some General Contractors and Builders who may be licensed, but they don’t have adequate training to perform home electrical wiring. This is something I sincerely hope to see changed in future State Licensing Laws.
    Dave

  4. Tim Doyle says:

    I have a GFI outlet that has two additional “downstream” regular outlets set in a kitchen. I have tested it with an electrical circuit tester. All three come up that they are wired correctly, but that one with the actual breaker will not trip. The problem is that the GFI will kick (when tested with the circuit tester) on the two additional outlets, but the one with the actual breaker will not trip! I have installed several of these in the past but this one was installed in my girlfriend’s condo by a very unscrupulous builder.