Flickering Lights May Require a New Light Switch
Amber in Nebraska asks; I have a light fixture that can be turned on/off by 2 different switches. Sometimes when I flip either switch, the light does not come on, or it flickers and then turns on…
A Sure Sign of a Worn Out Light Switch
Electrical Question: I have a light switch that doesn’t seem to be working right, what do you think the problem might be?
- I have a light fixture that can be turned On and Off by 2 different switches.
- Sometimes when I flip either switch the light doesn’t come on, or the light flickers and then turns on.
- One of the light switch switches seems a little loose, but the other one seems normal.
- What do you think the problem might be with these blinking lights?
This question is from Amber, a Homeowner from Norfolk, Nebraska.
Thanks for your electrical question Amber.
How to Fix a Flickering Light Problem
Application: Replacing a Faulty Light Switch.
Skill Level: Intermediate to Advanced. This electrical work is best performed by a Licensed Electrical Contractor.
Tools Required: Basic Electricians Pouch Hand Tools and Voltage Tester.
Estimated Time: Depends on personal level experience and ability to work with tools.
Precaution: Identify the light circuit, turn it OFF and Tag it with a Note before working with the wiring.
Notice: Installing additional fixture wiring should be done according to local and national electrical codes with a permit and be inspected.
Materials: Make sure the replacement light switch has the same amperage and voltage rating as the original switch, and is fully compatible with the electrical circuit, the light fixture and the type of light bulbs being used.
Replacing a Worn Out Light Switch
All of the indications in this electrical question sounds like one of your switches is getting worn out and needs replacing.
- Indications of a Bad Light Switch that Needs to be Replaced
- Flickering or blinking lights.
- A loose light switch.
- A warm light switch.
- A light switch that crackles or makes noise.
Light Switch Wiring
Wiring a Light Switch – Diagram 1
Fully explained pictures and wiring diagrams about wiring light switches describing the most common switches starting with photo diagram 1.
More about Wiring a Light Switch
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Lighting, Switch and Home Electrical Wiring:|
|« Previous||Next »|
|Replacing a Blower Motor for an HVAC System||50 HZ and 60 HZ Frequency Power for Home Appliances|