Fixing a Door Bell Chime
How to Repair your Old Door Bell Chime System
How to Revive an Old Door Bell Chime
[ad#block] Electrical Repair Question: I have old house door chimes that were disconnected by the previous owners of this 1934 house due to the noise. I would like to find out how to wire it back up. The transformer has been tested and is good. This old house has cloth wiring running to it.
Thank you, Linda
This electrical repair question came from: Linda, a Handy Woman from Archdale, North Carolina.
See more about Home Wiring for North Carolina
Additional Comments: Very good
Thanks for your electrical repairs question Linda.
Repair Your Old Door Bell Chime System
- The wiring attached to the chime should be tested to make sure there is voltage when the door bell button is pressed.
- If the chime will not work then the door bell button may need to be replaced. If the chime sounds like it is trying to work then the chime plungers may need to be cleaned or lubricated.
- Older door bell chimes are usually OK and work great, they just need a little TLC.
The Following will assist you with your door bell:
Electrical Wire for the Home
Complete listing of electrical wire types and parts used for home projects with electrical code information serves as selection guidelines.
For more information about Wiring Diagram
Home electrical wiring diagrams are an important tool for completing your electrical projects. An electrical wiring diagram can be as simple as a diagram showing how to install a new switch in your hallway, or as complex as the complete electrical blueprint for your new home or home improvement project.
The following may also be helpful for you:
Learn more about Home Electrical Wiring
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Repairs and Home Electrical Wiring:|
|« Previous||Next »|
|Wiring Four Way and Three Way Switches||Why New Light Bulbs May Not Work|