Electrical Wiring and Landlord Tenants Rights
We keep tripping a breaker and found that 7 lights and plugs all run off the GFI plug in the bath room. The apartment is about 60 years old. Is this electrical wiring normal?
Landlord and Tenants Rights Electrical Wiring Issues
Question: We keep tripping a breaker and found that 7 lights and plugs both in the bathroom and down in the living room all run off the GFI plug in the bath room. If the GFI plug trips off then all the items are off. The apartment is about 60 years old. Is this electrical wiring normal?
This electrical question came from: Terry, a Tenant from San Diego, California.
Thanks for your electrical question Terry.
Terry this is an indication that wiring in the apartment has become overloaded. While the original circuit wiring may have been acceptable when this 60 year old apartment building was first built, it definitely does not provide the circuits and capacity that is required for today’s lifestyle. This is an indication that the owner of the property may want to consider upgrading the electrical system. The landlord may or may not be obligated to upgrade the electrical wiring depending on the local building codes, however the general electrical safety items would include GFI Protection and Smoke Detectors in the required areas. Notify the landlord of the situation. You may also consult your local agency about tenant rights for more information.
The Following links will assist you with your electrical question:
Electrical Wiring Protection using Circuit Breakers
A guide to home electrical circuit breakers and how they work to protect your electrical wiring. When properly installed, your home electrical wiring is protected by a circuit protection device.
Bathroom Electrical Wiring Requirements
This wiring diagram and pictures explain the basic bathroom electrical code wiring requirements required for most new or remodel projects. Give your bathroom a face lift when you enhance the electrical devices that will bring out the best in you. Make your eyes sparkle with get a breath of fresh air when you install one of these smart upgrades.
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wiring!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester, [amazon.com], I use for the detection of Standard Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
|« Ceiling Fan Troubleshooting||Electrical Circuit Testing and Troubleshooting »|