Electrical Shock Hazard From Old Electric Tools
|
Why did I get an electric shock while using an old drill? Why Old Electric Power Tools Can Give You an Electric Shock. |
The Dangers of Old Electric Tools
[ad#block]Electrical Question: Why did I get an electric shock while using an old drill?
The drill was old, and I am happy to throw it away, but I have two questions:
- While I was using an old drill that is about 30 yrs old, I got a severe electrical shock.
- I convulsed and couldn’t move until the plug was taken out of the outlet.
- What could have caused this to happen?
- Should the circuit breaker have prevented it?
Thanks in advance!
Background: Dan, a Homeowner from Long Island, New York.
Additional Comments: great site!
Similar Question:
- I have two fans wired in series on my porch.
- With the fans on, I get a shock from the second fan when pulling the chain.
This electrical wiring question came from Robert, in Dallas, Texas.
Dave’s Reply:
Thanks for your electrical question Dan.
Electric Shock Hazard and Old Electric Tools
Why Old Tools Can Give You an Electric Shock
Dan, most older electric tools have metal cases or enclosures which conduct electricity to the user through the handle if there is a short in the electrical components including the cord.
- Grounded to the Floor
- This will occur especially if you are grounded by standing on a cement floor and your feet are not insulated by wearing insulated shoes or boots.
- Old Tools are Not Well Insulated
- Newer electric tools are double insulated with non-conductive enclosures which will eliminate the majority of the shock potentials from occurring to the user.
- Why the Circuit Breaker Did Not Trip
- Circuit breakers will only trip if the circuit load exceeds the limitation of the breaker.
- GFCI Outlet Protection
- The best protection against electric shock is GFI protection either at the circuit breaker or installing GFCI outlets in the garage.
- Replace Old Worn Out Electric Cord
- Replacing old worn out cords with a new one will help prevent electric shock as well.
Replacing a Cord for an Electric Tool
Skill Level: Beginner to Intermediate.
Tools Required: Basic Electricians Pouch Hand Tools and Voltage Tester.
Estimated Time: Depends on personal level experience, ability to work with tools.
Precaution: Unplug the cord of the electric tool before working with the cord wiring.
Notice: Be sure to obtain the correct cord replacement with the same type cord and AWG wire size.
More about Electrical Tools and Electrical Wiring
- GFCI
- Wiring Diagram GFI
- The features and benefits of GFCI outlets and receptacles will give you a clear understanding of the importance why these safety devices are required by code to help protect you and your family against accidental electrical shock hazards.
- Wiring Diagram GFI
- House Wiring Circuits and Circuit Breakers
- For more information about Electrical Safety
- Home Electrical Safety
- A new approach to keep kids and electricity apart with hopes to prevent children from being injured by electricity.
- This link is helpful as a Homeowner
Do-It-Yourself Electrical
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Electric, Tools and Home Electrical Wiring: | |
| « Previous | Next » |
| How to Select and Wire a 120 or 220 Volt Air Conditioner | Electrical Wiring For A Dishwasher |
