Electrical Question From Sandi About Dryer Wiring
I would like to know if I have my dryer power cable installed correctly. I had to change from a 4 prong to a 3 prong. There is no bond strap installed.
Electrical Question about: Dryer Wiring
Received from Sandi a Homeowner in Ft Walton Beach, Florida
Question: I would like to know if I have my dryer power cable installed correctly. I had to change from a 4 prong to a 3 prong. There is no bond strap installed. (that’s what the manual called it) I didn’t install the 4 prong so do not know if there was one installed when it was purchased. I have wired it the same way it looks in the manual but need to know if I have to install a ground strap.
If I do, will a 12 gauge wire with round connectors work, connected to the center terminal and green ground screw?
Additional Comments: I don’t do electrical things much (why I’m in the boat I’m in!) but your site makes things very easy to understand. That is so important when someone like me is reading this type of information! Thank you!
Thanks for your electrical question.
The Following links will assist you with your electrical question:
For more information about Wiring Diagram
This link is helpful as a Homeowner
Make sure not to miss these Resources for: More about Outlets
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
|More articles about Dryer Cords, Electrical and Home Electrical Wiring:|
|« Previous||Next »|
|Electrical Question From Janey About Lighting||Electrical Question From Steven About Dryer Wiring|