VOIP Telephones Setup
VoIP Telephones and Wiring Configurations Background: Marc, a Homeowner from Ottawa, ON, Canada [ad#block]Question: Hi, I’ve got a VoIP system up and running with a Sipura phone adapter. I’d like to wire the VoIP to my home’s unused “Line 2” so that theoretically, I could plug a “Line 2” phone into any (properly wired) phone […]
VoIP Telephones and Wiring Configurations
Background: Marc, a Homeowner from Ottawa, ON, Canada
I’ve got a VoIP system up and running with a Sipura phone adapter. I’d like to wire the VoIP to my home’s unused “Line 2” so that theoretically, I could plug a “Line 2” phone into any (properly wired) phone jack of the house and access my VoIP line.
I’ve made 2 of my own “crossover” cables (Red to Yellow, Green to Black) and plugged them as follows:
(A is Red-Green side and B is Black-Yellow side)
B: Phone jack
B: Other phone jack
In theory this should work but in practice I get a dead no-dial-tone.
The question is: how do I troubleshoot this?
I feel so close yet so far.
Thanks for the help!
Thanks for your electrical question Marc. I have provided the following links that lead to fully detailed information on this website that will assist you with your electrical question:
For more information about Phone Jack Wiring
Phone Jack Wiring
This telephone wiring diagram with photos and instructions will show you the direct steps to correctly wiring a telephone jack.
This link is helpful as a Homeowner
Make sure not to miss these Resources for: How-To-Videos
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about VoIP Telephones and Home Electrical Wiring:|
|« Previous||Next »|
|Identify Bath Exhaust Fan Electrical Problems||Light Fixtures and Dimmer Switch Compatibility|