Electrical Question from Josh about Buffers That Trip Circuit Breakers
|
Question: I have a 120 volt buffer that draws 12 amps and is rated at 1500 rpm and is dc rectified. |
Electrical Question from Josh about Buffers That Trip Circuit Breakers
Received from Josh in LA
[ad#block]Question: I have a 120 volt buffer that draws 12 amps and is rated at 1500 rpm and is dc rectified.The brand of it is a Mercury Floor machine burnisher. All of my service receptacles are 20 amp single receptacles (not a duplex) and are on their own 20 amp breaker. My workers still trip the breaker every now and then. Is there any device I could install on the buffers to regulate the amperage that is drawn.
Dave’s Reply:
Thanks for your electrical question.
Hey Josh – I am totally familiar with this scenario. The first thing that comes to mind is installing a speed control switch on the buffers that is rated over the 12 amps that the motors draw. The problem is the initial starting amperage surge. Another possibility would be a Soft-Start device. This is such a common problem with buffers used that I am surprised that the manufacturers do not build in a soft start circuit.
The Following links will assist you with your electrical question:
For more information about Other Electrical Issue
Home Electrical Wiring
This link is helpful as a Other
Home Electrical Wiring Resources
Make sure not to miss these Resources for: How-To-Videos
Electrical Videos
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Learn more about Home Electrical Wiring
|
||||||||
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical TesterThis is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet TesterThis is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring. It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire CutterMy absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires. This handy tool has multiple uses: The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation. The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets.. The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use. |
||
| More articles about Circuit Breaker, Electrical and Home Electrical Wiring: | |
| « Previous | Next » |
| Electrical Question from Ralph about Electrical Service Upgrade | Electrical Question from Brad about Light Switch Wiring |
