Electrical Question From Hank About GFCI Wiring
Question: I am about to finish building a 32′ x 48′ garage/shop and nearly ready to start the electrical wiring. I have been told that there are differences, according to the NEC, between wiring a garage or a shop.
Electrical Question about: GFCI Wiring
Received from Hank a Homeowner in Buhl, Idaho
[ad#block]Question: I am about to finish building a 32′ x 48′ garage/shop and nearly ready to start the electrical wiring. I have been told that there are differences, according to the NEC, between wiring a garage or a shop. Possibly?? at least one GFCI protected circuit in a garage for a ref. or freezer? I don’t plan to have either, nor a washer or dryer. This will be used as a normal garage to house regularly used vehicles, also to pull farm machinery in for minor welding and mechanical repairs. And some small woodworking projects.
Will this be a garage or shop and what are the differences in wiring (if any) according to the NEC?
Thank You for any reply.
Thanks for your electrical question.
The Following links will assist you with your electrical question:
For more information about Switches
This link is helpful as a Homeowner
Make sure not to miss these Resources for: How-To-Videos
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical, GFI-GFCI and Home Electrical Wiring:|
|« Previous||Next »|
|Electrical Question About Light Switch Wiring||Electrical Question From a Student About Automotive Wiring|