Electrical Question about Replacing a Casablanca Ceiling Fan
I am replacing current ceiling fans with 3 speed with double switches in the wall. One for fan, One for light. The older fan is a variable Casablanca with a light kit.
Electrical Question from Richard about Ceiling Fan Wiring and Replacing Casablanca Ceiling Fans
Received from Richard a Homeowner in Ovilla, Texas
[ad#block]Question: I am replacing current ceiling fans with 3 speed with double switches in the wall. One for fan, One for light. The older fan is a variable Casablanca with a light kit. One switches from the wall works fan and light, the other is dead. What is wrong? I want one switch to work light and one for fan. Thank you. Richard.
Thanks for your electrical question.
Richard you will not be able to use the Casablanca wall switch to control a non-Casablanca ceiling fan. The Casablanca ceiling fans and Casablanca wall switches have a unique system that is not compatible with other fan units.Â You will need to purchase a new remote control module kit to retrofit your new fans. This kit will include a receiver module to install up at the ceiling fan and a transmitter wall switch or hand held remote control. Make sure to set the dip switch codes differently for each fan remote unit.
The Following links will assist you with your electrical question:
For more information about Ceiling Fan Wiring
Ceiling Fan Wiring
This link is helpful as a Homeowner
Make sure not to miss these Resources for: How-To-Videos
Be Careful and Be Safe – Never Work on Energized Circuits!
For Best Results Consult a Licensed Electrical Contractor.
Locate An Electrical Contractor in Your Area
The following may also be helpful for you:
Learn more about Home Electrical Wiring
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Ceiling Fans, Electrical and Home Electrical Wiring:|
|« Previous||Next »|
|Replacing Old Low Voltage Light Switches||What does it cost to have an Electric Dryer Circuit Installed?|
I have a casablanca panama ceiling fan with the Inteliswitch system. The w-32 is dead. Is it possible to wire the system using a universal remote system and bypass the internal circuit board inside the fan housing.