Electrical Considerations When Installing Landscape Lighting
Installing Landscape Lighting: I would like to add landscape lighting to up light some trees behind a water feature by our pool.
GFCI Protection for Landscape Lighting
Electrical Question: I would like to add landscape lighting to up light some trees behind a water feature by our pool.
- I’ve picked up a low voltage (12v) landscape lighting kit with transformer, cable and 6 spot lights from Lowe’s (Portfolio is the brand). I’ve had a quick look at the instructions and the transformer says not to be used within 5 feet of a pool (should be ok) and the spotlights say no cabling within 10 feet of the pool (most likely a problem).
- I have attached a photo to give you a better idea. It’s the 3 palm trees behind the rock waterfall that I’m hoping to up light. The existing outlet is against the fence just behind that deck box.
- What I’m wondering is does the rock wall in between where the lights would be and the pool make it ok to use what I have? Will getting a pool rated transformer make it ok? Or do I really need to go all out and use a submersible kit like those used in a pond?
- I would also like to put some submersible lights in the waterfall. Would pond lights be safe to use there since the water runs into the pool? Or is this whole thing not really a DIY project?
Dave, Thank you for taking the time to create this website and share your experience.
Thank you for your time,
This electrical question came from: Darren, from Rescue, California.
See more about Home Wiring for California
Thanks for your electrical question Darren.
Wiring Landscape Lighting Projects
Application: Electrical Wiring for Landscape Lighting.
Skill Level: Intermediate to Advanced – Best performed by a licensed electrician..
Tools Required: Basic Electricians Pouch Hand Tools, hole saw and drill motor, drop cloth, a Voltage Tester and a fiberglass ladder.
Materials: Type NM Cable or same type and gauge cable as the existing light circuit cable, staples for securing the cable, light fixture cut in box or required well supported fixture box for the specific light fixture, wire connectors.
Estimated Time: Depends on personal level experience, ability to work with tools, access to the circuit wiring and project area, and experience working with light circuit wiring.
Precaution: Identify the panel lighting circuit, turn it OFF and Tag it with a Note before working with the wiring.
Notice: Modifying or installing additional electrical wiring should be done according to local and national electrical codes with a permit and be inspected.
Installing Landscape Lighting
- GFCI Protection
- When installing electrical power that will be used for outdoor devices the circuit should always be protected by a GFCI Ground Fault Circuit Interrupter.
- Fountain Light Fixtures
- If a light fixture will be submerged then the fixture should be UL rated as such to eliminate shock hazards.
- Swimming Pool Lights
- When installing electrical devices within proximity of swimming pools then there are several Electrical Codes that would have to be addressed, as you have seen this stated on the fixtures that have been purchased.
- Safe Landscape Installation
- As stated in this question, and due to the location of the pool and the lighting, this landscape lighting project may be best turned over to a local electrical contractor who can see the complete project and make the best recommendations and installation.
See More about Electrical Wiring Projects
Electrical Project Guidelines
Electrical wiring projects guidelines necessary to follow for most any project you may choose to do. By following a few simple steps you will be considering the components necessary for a successful project from start to completion.
Home Electrical Safety
Home Electrical Safety
A new approach to keep kids and electricity apart with hopes to prevent children from being injured by electricity.
Residential Home Wiring Projects
Installing electrical wiring projects for safety and home improvements.
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Wiring and Home Electrical Wiring:|
|« Previous||Next »|
|Troubleshooting a Hot Tub Problem||Why Electrical Power is Lost to Half the Circuits|