Electrical Circuit for a Combo Oven and Microwave
How to Wire a Circuit for an Oven and Microwave Combo: Combo Oven and Microwave Circuit, Oven Microwave Circuit Requirements.
How to Wire a Circuit for an Oven and Microwave Combo
Electrical Question: I have a combo microwave and wall oven that requires 120 volts for the microwave and 240 volts for the wall oven.
- Combo Microwave Wall Oven
Both voltages are provides by one 4-wire cable with dual circuit breaker protection for the 240 volt circuit.
- 120 Volt Microwave Oven
It looks like this leaves the 120 volt microwave oven as well as the wall oven components operating at 120 volts such as the controls, lighting and convection fan without the usual 15 amp circuit breaker protection since the 240 volt circuit, which also carries the 120 volt.
- 30 Amp 240 Volt Circuit
The circuit has dual 30 amp circuit breakers. Because of the amperage rating of the two oven units, it looks like when the microwave oven operates at the same time as the wall oven at peak power, the circuit breaker might trip.
Am I overlooking something?
This electrical wiring question came from: Ray, a Other from Avon, Connecticut.
Thanks for your electrical wiring question Ray.
Skill Level: Intermediate to Advanced. This electrical project is best installed by a Licensed Electrical Contractor or Appliance Technician.
Tools Required: Basic Electricians Pouch Hand Tools, Battery Operated Drill Motor, a support for the oven before inserting it into the cabinet.
Estimated Time: Depends on personal level experience, ability to work with tools and connect 220 volt electrical circuit wiring.
Precaution: Identify the oven circuit at the panel, turn it OFF and Tag it with a Note before making the oven wiring connections.
Notice: When installing an additional 220 volt oven circuit the work should be done according to local and national electrical codes with a permit and be inspected.
Combo Oven and Microwave Circuit
Ray, I understand your point of view, however please consider the following:
- Combo Wall Oven Circuit
The internal circuit design of this equipment such as this is carefully designed to prevent circuit overload and circuit balanced loading as much as possible.
- 240 Volt Oven Circuit
When a 3-Wire with ground circuit such as this is used the internal devices can be connected so the overall load will be equal as much as possible due to the internal wiring assignments.
- 120 Volt Oven Control
When 120 volt circuits are split off and used for lower current devices such as the clock, oven light, fan etc., they are usually protected by internal fuses which provide protection for that circuit.
High Temperature Wire Insulation Types
- You may also observe that the wire gauges may be smaller as well, and this is due to the type of insulation of the internal wiring.
- This type of wire insulation can withstand higher temperatures and still deliver the required level of electricity.
Oven Microwave Circuit Requirements
- The manufacturers Installation and Operation Manual is always the main guide for circuit type and size.
- By following their requirements you will be ensured that your oven and microwave will operate properly and the be equipment will be covered under warranty as described in the owners manual.
More about Oven Circuit Wiring
Wiring Options for a Kitchen Oven
Fully Described Kitchen Electric Oven Installation with a typical 220 Volt electric circuit. You may find yourself with either a 3-wire or 4-wire electric oven. Lets look at how the electric oven is wired and the possible solutions if your circuit does not seem to the same.
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Oven Wiring and Home Electrical Wiring:|
|« Previous||Next »|
|Moving an Electric Range Circuit||How to Avoid Electric Shock from a Pressure Washer|