Add a Touch Sensor to a Light Fixture
How to Install a Touch Sensor Switch or a Remote Control Switch for a Light Fixture: Can I wire a touch sensor switch or a remote control for a light fixture?
Light Fixture Touch Switch or Remote Control
Electrical Question: Can I wire a touch sensor switch or a remote control for a light fixture?
- I am replacing a ceiling fan with a metal hanging light fixture.
- The problem is that our home was built in 1978 and there is no on off switch plate so the fan operates by the pull chain.
- Adding a wall switch is not an option.
- Is it possible to make my new light touch activated?
- Can I wire in a remote control for my new light.
- I guess I could wire in a pull chain switch, but I’m not sure how that would look.
What do you think?
This electrical wiring question came from: Wilson, from Greenbrier, Tennessee.
Thanks for your electrical wiring question Wilson.
How to Add a Touch Sensor Switch or Remote Control Switch
Application: Wiring a Touch Sensor Switch or Remote Control.
Skill Level: Beginner to Intermediate – Best performed by a licensed electrician.
Tools Required: Basic Electricians Pouch Hand Tools and Voltage Tester.
Estimated Time: Depends on personal level experience and ability to work with tools.
Precaution: Identify the light circuit, turn it OFF and Tag it with a Note before working with the wiring.
Note: Make sure the remote control unit has the capacity in watts for the lamps that will be installed in the fixture.
Light Fixture Controlled by a Touch Sensor or a Remote Control Switch
The following is an example of how a touch sensor switch or remote control unit may be added to a light fixture and used as a switch.
- Touch Sensor Switch
Touch sensor light switches are modules which are available from most hardware for lighting stores.
- Wiring a Touch Sensor
The touch sensor module may be wired to most any light fixture making it very easy for turning on the light by simply touching the light fixture. The touch sensor switch is supplied with two circuit wires and a ground wire which connect to the light fixture wiring.
- Optional Light Switch Controls
Another option for controlling a light fixture where a wall switch has not been installed is to install a remote control kit, just like one that is used for ceiling fans.
- Remote Control Switch
This is basically the same method used when installing a remote module for a ceiling fan where the parts are the same but the application is slightly different. The remote control module is supplied with leads that connect to the circuit wires, and lead wires that connect to the light fixture.
- Light Fixture Switch Control Wiring
The process of wiring a touch switch or remote control module is not very difficult but be sure to read and follow all of the instructions.
- Mounting Area Requirements
The base of the light fixture will need to be large enough to contain the remote control module, the wiring and the connectors.
- Specific Instructions for the Switch and Light Fixture
IMPORTANT: There is a variety of touch sensor switches and remote control modules that are available for this type of application, therefore be sure to consult the instructions and wiring diagrams that are provided with each unit for detailed instructions, and to be sure the device is fully compatible with the light fixture and your specific application.
More about Light Fixtures and Wiring Switches
Planning and Installing Home Lighting
Home lighting articles covering recessed lighting, under cabinet lighting, lighting terminology and more.
Wiring a Light Switch – Diagram 1
Fully Explained Light Switch Wiring Diagrams. Detailed Electrical Wiring Diagrams and Pictures assist your Home Electrical Projects.
Home electrical wiring projects with pictures and wiring diagrams.
The following may also be helpful for you:
Be Careful and Be Safe - Never Work on Energized Circuits!
Consult your Local Building Department about Permits and Inspections for all Electric Wiring Projects.
The Safest Way to Test Electrical Devices and Identify Electric Wires!The Non-Contact Electrical Tester
This is a testing tool that I have had in my personal electrical tool pouch for years, and is the first test tool I grab to help identify electrical wiring. It is a Non-contact tester that I use to easily Detect Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets and Wires. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test. Very handy and easy to use.
The Quickest Way to Check for Faulty Electrical Wiring!The Plug-In Outlet Tester
This is the first tool I grab to troubleshoot a problem with outlet circuit wiring. This popular tester is also used by most inspectors to test for power and check the polarity of circuit wiring.
It detects probable improper wiring conditions in standard 110-125 VAC outlets Provides 6 probable wiring conditions that are quick and easy to read for ultimate efficiency Lights indicate if wiring is correct and indicator light chart is included Tests standard 3-wire outlets UL Listed Light indicates if wiring is incorrect Very handy and easy to use.
Strip Off Wire Insulation without Nicking and Damaging the Electric Wire!The Wire Stripper and Wire Cutter
My absolute favorite wire stripping tool that I have had in my personal electrical tool pouch for years, and this is the tool I use to safely strip electrical wires.
This handy tool has multiple uses:
The wire gauges are shown on the side of the tool so you know which slot to use for stripping insulation.
The end of the tool can be used to grip and bend wire which is handy for attaching wire onto the screw terminals of switches and outlets..
The wire stripper will work on both solid and stranded wire. This tool is Very Handy and Easy to Use.
|More articles about Electrical Wiring, Fixture Wiring, Light Switch Wiring and Home Electrical Wiring:|
|« Previous||Next »|
|Adding an Electric Heater to a Home Electrical Circuit||Installing a Electric Water Heater Circuit|